stock rail wing brackets

Another new product launched in 2025, we have further refined the interface between the stock, OEM rails of most Toyota and Lexus roof rails and the 1x2 aluminum extrusion. Compared to the stock rail angle brackets, these new brackets are smaller and easier to install, making them an obvious choice when adding extrusion cross bars across your OEM rack rails.

Each bracket comes with 2 M8 bolts to connect to lock washers, washers, and channel nuts inside the stock rail channel, as well as 2 1/4-20 bolts, lock washers, washers, and track nuts to run inside the 1x2 extrusion slots. Alternatively, you can request hardware for the 40mm extrusions, if you prefer to run those instead of the 1”x2”.

Stock Rail Wing Brackets - select quantity
Intended use

Cross Bar Kits

If you’d like to add 2 or 3 cross bars to your stock rack rails using the parts above, we offer complete kits to do just that. Note the default width for cross bars is 50”, but you can select a different length if you choose to. You also have the option of selecting either the wing brackets or the angle brackets, based on your intended use and/or future uses of these products. As always, please let us know if you have any questions prior to ordering.

Extrusion Cross Bar angle bracket kit
specify length
Which bracket do you want?
other length request

Limited Liability: let's just say that you are responsible for your own actions. Gamiviti by no means encourages driving any vehicle while distracted. Nor do we endorse any modification that could potentially jeopardize the safety of your vehicle or others. When you choose to purchase any Gamiviti products, please know that you are doing so at your own risk and assuming full accountability for your actions.

Cart (0)