Rack Brackets
As we continue to innovate the attachment and integration of Gamiviti roof racks, other aftermarket racks, awnings, OEM racks, cross bars, and rack accessories in 2022, the result of this effort is more solutions that can be shared and offered to you as products, enabling you to further enhance your own expedition with a variety of custom solutions.
Extrusion Adapter Plates
These plates were developed to join standard 1x2” or 1” square aluminum extrusions with other accessories that use a 3” hole spacing, to allow people running smaller extrusions as cross bars to bolt up Gamiviti rack accessories, like the rack receivers and traction ramp brackets. They also work on the extrusion racks, including Prinsu, Sherpa, Victory, Uptop, Bowfin, Prospeed, or anyone else who makes bolt-together racks with extrusions, allowing them to take advantage of our rack receivers and other accessories.
Features include:
Ability to mount to a single center slot, or 2 slots 1” apart on your aluminum extrusion.
Ability to mount any accessory that uses a 3” hole spacing, including the rack receivers and traction ramp brackets from Gamiviti
Provides a flat and secure plane on top of your extrusion, allowing you to bolt-through other accessories.
Provides an open hole sized for ratchet straps, enabling the user to have a custom anchor point for gear and equipment.
Sold in pairs, also does not include any track nut hardware (these are unique to your cross bars, so you can use your own hardware). If ordered with any Gamiviti accessory, we will include the hardware to attach the accessory to the adapter plates.
Accessory Angle Brackets
These brackets provide a number of gear mounting solutions, and the ability to change the mounting surface 90 degrees. They were also developed to mate with standard Toyota/Lexus OEM side rails, allowing you to bolt accessories directly to your OEM rack. Key uses include:
Mount an extrusion across your roof, connected to your OEM rack rail, to give yourself a custom extrusion cross bar.
Mount Gamiviti rack receivers directly to your OEM rack rail.
Add Gamiviti rack receivers to the side of any vertical surface, including the walls of most extrusion racks.
Create a handle, attachment point, or light mounting surface to the side of any extrusion rack side wall.
Mount a set of Gamiviti rack receivers to your garage wall, enabling quick storage & deployment of your awning, shower enclosure, multi plate, or other accessory.
Brackets are made from 10ga stainless steel, allowing you to run them as-is, or paint any color you desire. Sold in pairs, with the option for no hardware, or the bolts & track nuts shown above to mate these to your OEM rack rail. If another accessory is ordered at the same time, we’ll include the hardware to mate that accessory to these angle brackets, and if you’d like to share any information about your specific use case that would help us get you the hardware you need, you can add that to the field below when placing your order.
Accessory Angle Brackets and Rack Receiver kits
Order everything you need to add our rack receivers to the slotted OEM side rail of your Toyota or Lexus. Kits come with all hardware necessary to attach the angle brackets to your OEM rail, and attach the rack receivers to the angle brackets. Just add awning…
extrusion cross bar and angle bracket kits
Extrusion cross bar kits come with hardware to attach 1x2 extrusion cross bars to the accessory angle brackets, including end caps, as well as the hardware to connect the Accessory Angle Brackets to your OEM rack. This is a complete kit, for adding either 2 or 3 cross bars to your OEM rack rail. Note that the shipping included with your purchase covers the continental US, additional shipping may apply for addresses outside of that we’ll email if that’s the case.
Most Toyota/Lexus vehicles will use our default 52” length, however other lengths are available.